hp smart array p410i controller disk status commands

Order to make it available to operating system: setarch x86_64 -uname-2. Setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show config detailĬommand similar to the following may be used to configure physical HDD in Setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show config Setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show status If everything goes well the above command will return something like Smart Array P410i in Slot 0 (Embedded) (sn: 50014380175C3490)Įxamples of using hpacucli command include: setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show Utility): # setarch x86_64 -uname-2.6 /usr/sbin/hpacucli ctrl all show Without the following workaround (alternatively one may use Unfortunately it was not possible to use hpacucli utility with Linux-3.2 Obviously we want to use at least Linux kernel 3.2 which has new hpsa HP software which is available for Debian from the following address: deb stable/current non-free The latter is available through BIOS menu on boot or using proprietary So health monitoring will not be possible.Īnother problem that HDD adding or replacing should be done through HDD One of the obvious drawbacks of this is filtering S.M.A.R.T. ctrl all show detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: xxxxxxxxxxxxxxxxx Cache Serial Number: xxxxxxxxxxxxxxxxx RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 5.14 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3. When the controller displays 'Press to run the Option ROM Configuration For Arrays Utility,' press F8.

In 16-bay systems there is usually a P410 along with a P410i controller. System only as logical devices after they are configured in controller. The Option ROM messages will go through each RAID controller installed on the system. The overall impression regarding building storage system on HP ProLiantĪs expected HP Smart Array P410i is not supporting RAID6 and it is not

Happened to be possible with some caveats. Server with HP Smart Array P410i controller for small capacity storage.Īlthough we don't recommend to use such hardware for data storage it We've been asked to evaluate the possibility to use HP ProLiant D元80 G7

Hp smart array p410i controller disk status commands